Produits

Home > Produits > Fil à coudre

Fil à coudre en tissu 100% polyester pour sacs / vêtements en textile

LQ-4-04

Warning: getimagesize(https://fr.threadlq.com/upload/big/100spunpolyesterliningfabricsewingthread_1_45_1564364004.jpg): failed to open stream: HTTP request failed! HTTP/1.1 404 Not Found in /home1/j1904011liqi/public_html/fr/amp/product_index.php on line 56

Lieu d'origine: Guangzhou
Marque: Liqi
Numéro de modèle: 40S / 2
Matériel: Tissu 100% polyester
Motif: Teint
Caractéristique: Haute ténacité
Couleur: Couleurs
Type de fil: Fil filé
Utilisation: Couture Tissage Tricot
Autres comptes: 20s / 30s / 40s / 50s / 60s
Paiement: T / T, L / C

The quality of Fabric thread  ribbon, machine management and dyeing formulation also have important influence on the control of dyeing color difference. In the process of thermosol dyeing of polyester Fabric thread  ribbon, the consistency of the quality of green ribbon should be controlled systematically, the maintenance and maintenance of the machine table should be done in time, and the dyes and auxiliaries should be used reasonably in order to obtain good dyeing effect.

 

The factors such as roll pressure, uniformity of fixing temperature in baking oven, infrared pre-baking temperature, moisture content and mass concentration of anti-swimming agent all affect the color difference of continuous thermal dyeing of polyester Fabric thread  ribbon. 

Generally, the roll pressure is 0.2 MPa, the difference between the left, middle and right of the oven temperature is not more than 2 C, the infrared pre-baking temperature is 100 C, and the mass concentration of anti-swimming agent is not more than 15 g/L. The green strip should be fully dried before and after pretreatment to effectively control the dyeing color difference of the ribbon.

 

Samples of fabric fabric belts and guest samples

Fabric thread  ribbon material: Reflective color light

 

Differences in weave patterns of Fabric thread  ribbons: Density

 

Dyeing process differences of Fabric thread  ribbons: Methods, dyes

 

Bulk goods dyed by Fabric thread  ribbons and confirmed samples

 

Transverse chromatic aberration between Fabric thread  strips

 

Longitudinal chromatic aberration between each Fabric thread  ribbon

 

Fabric thread  ribbon and its conditions difference

 

Color difference between dyed batches of Fabric thread  ribbons

 

On the colour fastness of Fabric thread  ribbons

 

The color fastness of Fabric thread  ribbon is one of the important quality indexes of textiles. 

The so-called color fastness refers to the degree to which the color of dyed textiles remains firm under the physical and chemical effects. 

That is to say, the color fastness of dyed textiles affected by the outside world is called color fastness. 

The colour fastness is expressed by the change of colour and lustre of the test sample and the grading of the staining degree of the white cloth.

 

Among all kinds of color fastness items of Fabric thread  ribbon, the most commonly used color fastness at present are rubbing fastness, perspiration fastness, washing fastness, light fastness, water-soaking fastness, brushing fastness, climate fastness and so on. In real life, the final use of products is the main basis for deciding which items to assess. 

Among them, sweat resistance, dry friction resistance and water-resistant color fastness are the items required by the basic safety technical specifications of textiles

All dyed textiles should be assessed. 

In addition, the saliva color fastness of textile products for infants and young children should also be tested.

Visual evaluation method is generally used to evaluate the color fastness of Fabric thread  ribbons, that is, grey sample card is used as standard sample, under certain lighting and environmental conditions, the gray card and sample are compared with human eyes to determine the original sample discoloration and staining series of white cloth. 

Grey cards (discoloration and staining, respectively) have five fastness grades, namely 5, 4, 3, 2 and 1. Level 5 is the best and level 1 is the worst. In each of the two levels, we add half grade, that is 45, 34, 23, 12, so our daily gray card is 5 grade 9, and the color fastness evaluation result is one of 9 grades. 

If a certain color fastness of the ribbon product does not reach the standard level, then the ribbon product is not qualified.

 

Following are the standards for weaving Fabric thread  belts that must be met:

 

1. The washing fastness of Fabric thread  tape is above 3.5 grade, passing ISO105-C01:1989 test standard.

 

2. Fabric thread  tape rubbing fastness above 3.5 grade, passed ISO105-X12:1993 test standard

 

3. The fastness to sunlight of Fabric thread  tape is above grade 4. It has passed the ISO105-B02:1994 test standard.

 

3. On the light source of Fabric thread  tape painting

 

Fabric thread  ribbon textiles thread have to go through many processes in the production process. 

In this process, due to the errors caused by various reasons such as raw materials, production technology, operation, etc., the fabrics in different batches, or even the same batch, will vary in color. 

Fabric thread  color difference size, if the color light source is different, the color environment, the color time is different, the evaluation of color difference is also different. 

Therefore, in order to accurately evaluate the color difference and ensure the consistency of color results, in the visual evaluation of color, we must select the light source designated by the merchant in the standard color matching light box to avoid the visual difference caused by the non-standard light source or different light sources.

 

4. Classification of color light sources for Fabric thread  ribbons

 

D65:

 

International standard artificial natural light source for Fabric thread  belt, color temperature 6500K.

CWF:

 

Fabric thread  ribbon with cold white fluorescence, 4150K, American store light source, American businessmen often use color light source.

 

TL84:

 

Fabric thread  ribbon is cold white with a color temperature of 4000K. It is commonly used as color matching light source by European and Japanese businessmen.

 

F/A:

 

Fabric thread  with yellow light source, light color reference light source, suitable for replacing the light source in the family or hotel room to observe color.

 

UV:

 

Fabric thread  with ultraviolet light, wavelength 365 nm, used to detect whitening agents or translucent dyes on fabrics

 

U30 (TL83):

 

Fabric thread  with warm white light, color temperature 3000K, another American commercial light source

 

Application of Fabric thread  ribbon: clothing, shoes and caps, bags, toys, handbags, crafts, automobiles, sports goods, medical appliances and other fields

 

Outdoor products industry

 

MountaineeringcCamping Fabric thread  belt safety thread belt, mountaineering backpack thread belt, thread tent, personal protective goods.

 

 

Sports fitness industry:Fabric thread  belt sports bag, fitness equipment, children's traction rope.

 

Pet products industry:Fabric thread  with pet leash, pet collar, pet strap.

 

Military security industry:Fabrics thread with military and police fire protection, parachute seat belts.

 

Luggage and bags:Fabric thread  ribbon gift box belt,Fabric thread  with bags, handbags, luggage belt.

 

Handicraft industry:Fabric thread  tape camera/MP3/MP4/U disk tape, certificate hanging tape, key buckle ribbon, etc.

 

Apparel industry:Fabric thread  ribbon Watch ribbon, wrist ribbon, garment accessories, waistband.

 

Industrial automobiles:Fabric thread  belts, automobile seat thread belts, industrial hoisting.

 


textile, en tissu, Sacs, machine à coudre

Partager sur: